Trục láp công nghệ với dầu bôi trơn tự động

Thông số kỹ thuật

Industrial Arbor with Automatic Lubrication/ZIA 219
Đặt hàng-Nr                                                 Mô tả

ZIA -KN

Automatic Internal Lubrication

Tool Holder For Annular Cutters with Weldon shanks 19 mm (3/4").

ZIA 219-KN MT 2 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 19 mm (3/4").

ZIA 319-KN MT 3 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 19 mm (3/4").

ZIA 419-KN MT 4 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 19 mm (3/4").


Tool Holder For Annular Cutters with Weldon shanks 32 mm (1 1/4'').

ZIA 332-KN MT 3 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 32 mm (1 1/4'').

ZIA 432-KN MT 4 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 32 mm (1 1/4'').


The ZIA-KN Annular Cutter Weldon Shank Arbor With Morse Taper Is An Ideal Tool Holder For Using Annular Cutters On Magnetic Drilling Machines Or Conventional Drilling Machines. The BDS Industrial Arbor ZIA -KN Is Available In Morse Taper 2, 3 And 4. Available In Two Types One For Using With Annular Cutters With 19 M Weldon Shank And Other For Annular Cutters Above 19 Mm Weldon Shank. In General Annular Cutters Below 60 Mm Diameter Have 19 Mm Weldon Shank And Above 61 Mm Diameter Have 32 Mm Weldon Shank. The Special Of ZIA-KN Annular Cutter Weldon Shank Arbor Is That It Is Equipped With Automatic Internal Lubrication System, That It Just Needs The Connection Of The Coolant Tube To Its Coupling Nipple And The Coolant Flows Through The Arbor From Inside The Annular Cutter While Drilling.